Enjoy Your Colorful Life, Just Start From Wsiiroon car led reading atmosphere decorative lights.
Clean & stylish LED lights, enhanced the outline, make your car stands out in the crowd.
Wireless Remote Control
8 Colors to Choose
Color Can change With Music and Voice
Feature:8 Monochrome Modes:
Red,Green,Blue,White,Orange,Yellow,Cyan,Purple
JUMP3: 3 colors jump changing
JUMP7: 7 colors jump changing
FADE3: 3 colors gradual changing
FADE7: 7 colors gradual changing
Brightness +/-: When in static mode(default): to adjust the brightness(16 grades). When in jump3, jump7, fade7 mode: to adjust the light flashing rate(8 grades).
20key infrared music led controller adopts the advanced micro control unit, it is used for controlling a variety of led lamp, while you could adjust brightness, static colors and color changing effects via infrared remote control.
When in sound-control mode, the colors will change with the music rhythm.
Specification:Input voltage; DC12v
Output: 2 circuit
Connecting mode: Common anode
Maximum current:4A
Output current:2A
Net weight:35g
Gross weight:64g
power: <2.4W
Included: 2*T10 connector, 2*Double tip connector, 2*12 led bulbs, 1 remote control, a manual
Easy to Use 1. Remove the lampshade with a hard piece or a screwdriver from the
edge.
2. Remove the original car light bulb, pay attention to the light bulb hot.
3 According to the original car bulb model, install the corresponding connector, butt led bulbs.
4.Open the switch, led lights will be on. (when you install the double tip connector, if it s not on, you can turn another direction to connect)
Use and Precautions:
1.Connect the load lines and power lines, make sure all the connection correct before power switched on.
2.Ensure there is no obstacle between the IR controller and the receiver when operating.