(9:00AM to 5:00PM)
> Noiposi 3.7V 850mAh 25C Lipo Battery 5Pcs and X6 Charger for Syma X5C
45867096

Noiposi 3.7V 850mAh 25C Lipo Battery 5Pcs and X6 Charger for Syma X5C X5C-1 X5SW X5C-1 X5SC X5SC-1 Cx-30 Cx-31 Quadcopters

Product Code:BT-45867096

Product weight:0.30 Pounds

Our Price:
PKR 12513.00

Noiposi 5Pcs 3.7V 850mAh 25C Lipo Battery for Syma X5C X5SW X5SC X5A X5
☞This 3.7V 850mAh LiPO battery is a replacement battery.
☞It will give more PUNCH and ROBUST performance due to its higher current output and power.
☞Up to 30% longer flying time than orginal battery,high capacity can make your drone show a variety of difficult movement

Specification:
☞Voltage: 3.7V
☞Capacity: 850mAh
☞Continuous discharge rate:25C
☞Size::43*25*10mm/1.69*0.98*0.39inch
☞Weight:18g/0.039b

Package List:
☞5pcs*3.7v 850mah 25c lipo battery
☞1*X6 charger

Compatible with these Syma models:
☞Syma X5
☞Syma X5C
☞Syma X5C-1
☞Syma X5SC
☞Syma X5SW
☞Cheerson CX-30W
☞Direct replacement battery for these,no modification is needed.

X6 Intelligent Charger for 3.7V Lipo Battery:
☞Advance individual charging method - charges each cell individually
☞Overcharge protection
☞Short-circuit protection
☞Light weight
☞Red Lights on: currently charging
☞Red Lights off: charging complete

Caution:
ϟCharge the Li-Po battery with a Li-Po battery charger only
ϟCharge the Li-Po battery on a heat resistant surface along
ϟInspect the Li-Po battery before charging and operating
ϟDo not allow Li-Po cells to overheat at any time
ϟDo not over discharge the Li-Po battery
ϟDo not charge the battery
♥♥If you have any problem with our products,please contact us by email or ask the question on the product page.We will try our best to solve your problem!♥♥

  • ★3.7V 850mAh 25C Lipo Battery 5Pcs and X6 Charger
  • ★Compatible for:Syma X5 X5c X5c-1 X5sw X5sc X5sc-1 Cx-30W Cx-31 Cheerson Cx-30 Rc Quadcopters
  • ★Charger Voltage input: DC 5V; Voltage output: 4.2V,Over charge protection, Short circuit protection
  • ★Battery Size:43*25*10mm/1.69*0.98*0.39inch
  • ★Syma X5C/X5C-1 need to make some modifications to the battery compartment for this battery to fit. It is several millimeters thicker than the stock batteries. All you need to do is snip a piece from the center of the battery holder to give you the extra millimeters you need for the camera/battery cover to fit right. It still holds the stock batteries perfectly and it allows the camera/battery cover to fit properly.