(9:00AM to 5:00PM)
SANSI 30W (250W Incandescent Equivalent) LED Security Motion Sensor Outdoor Light
Compared with other security lights, this LED security motion activated light can be rated at 3400lm just with 30W, which is far brighter to provide security for your home or business accommodations. You could cut down your electricity bill by up to 88% by replacing 250W incandescent bulb with 30W SANSI LED light!
3 Different Sensing Modes:
Test Mode
Set-up: Put the ON-TIME switch at the bottom of the sensor in the TEST position.
Function: When people or any other living objects pass through the induction zone, the light turns on for 5 seconds automatically. Test Mode helps you know whether the motion sensor is working well.
MOTION SENSOR MODE (Working Mode)
Set-up: Put the ON-TIME switch in the 1, 5, or 10 minutes position.
Function: Motion Sensor Mode only works at night. If people or any other living objects pass through the induction zone, the light will be on automatically for 1, 5, 10 minutes chosen.
MANUAL MODE (Working Mode)
Set-up: Flip the light switch off for one second then back on to toggle between AUTO and MANUAL mode.
Function: Under Manual Mode, the light could be on at night for 6 hours.
*Note: Manual mode only works at night and with the ON-TIME switch in the 1, 5, or 10 minutes position.
180° Wide Sensing Range
The sensing light angle of SANSI LED Security Motion Light can reach 180° wide sensing range and max 50ft motion coverage. The recommended installation height is 3.2~13.1ft.
Applications
Villas, Garages, Gardens, Courtyards, Doorways, or any other areas need automatically lighting in the darkness
Remarks:
The Security Light is waterproof, which is able to protect against low-pressure water jet spray. But it can not be put under the water.
